Featured Technologies

Bolt-Frac Composite Plug

September 10, 2015September 17, 2015 admin

BOLT-FRACTM Composite Frac PlugCNPC USA’s Bolt-FracTM series of composite frac plugs engages a novel approach at preventing plug pre-sets during operations utilizing an innovative anti-preset design. The anti-preset design not only avoids a costly mis-run during operations, but moreover allows for a faster deployment speed through the vertical sections of a wellbore. The Bolt-Frac composite plug also has an extended application range to the standard composite site frac plug, with a maximum temperature rating of 300^oF and a maximum differential pressure of 12,000 psi.

Optimized materials selection
Glass fiber reinforced polyester composites
FKM seal elements
G2 cast iron slips with hardened teeth
Optimized structural design
Anti-preset single piece slip design
No spinning while milling
Bi-directional wicker style slips
Fast mill-out, 10 to 20 minutes
Setting Methods: Wireline, coiled tubing or threaded tubing
Deployment speed: up to 500 ft./min
working temperature 300 °F
differential pressure 12,000 PSI
Passed tests according to ISO14310
Designed, manufactured, assembled and tested in USA

Vertical, deviated, and horizontal wells
Zonal isolation during multistage stimulation
Ball can be run on-seat or dropped from surface
SPECIFICATIONS

Casing Size Casing Weight Max Tool OD Pressure Rating Temperature Rating Setting Tool
5 ½ in. 17 – 23 #/ft.

4.34 in. 12,000 psi

300oF

Baker E20

CNPC USA Corporation

2901 Wilcrest Drive, Ste. 600

Houston, TX 77042 USA

+1 713 972 6600

For more information visit cnpcusa.com

Sales Inquiries contact [email protected]

®, ™ and SM are trademarks owned by or licensed to CNPC USA Corporation

Big-Boar Large Bore plug

September 10, 2015September 11, 2015 admin

BIG-BOARTM

Large Bore Frac Plug

CNPC USA’s Big-Boar^TMseries of frac plugs present a compact, millable, and large OD design along with our anti-preset technology to reform the plug & perf market under the theme of efficiency. At only 16” in length, and incorporating a G2 austempered cast iron body, millability is introduced to the large bore plug should the need arise with recompletion. The anti-preset design not only avoids a costly mis-run during operations, but moreover allows for a faster deployment speed through the vertical sections of a wellbore.

Optimized materials selection
G2 austempered cast iron body
Nitrile seal elements
G2 cast iron single slip with teeth hardening
Optimized structural design
Anti-preset design
No spinning while drilling
Bi-directional single slip design
ID 2.75 in
Millable

TuffSOL^TMseries Mg dissolvable balls

Drillable materials
Deployment speed: up to 500 ft./min
Max. working temperature 300^oF
Max. differential pressure 10,000 psi
Designed, manufactured, assembled and tested in USA

Vertical, deviated, and horizontal wells
Zonal isolation during multistage stimulation
Flow-through conditions to leave the plug in well and let the isolating balls dissolve.
SPECIFICATIONS